Top 9 12 Hp Deep Well Jet Pump
We spent many hours on research to finding 1/2 hp deep well jet pump, reading product features, product specifications for this guide. For those of you who wish to the best 1/2 hp deep well jet pump, you should not miss this article. 1/2 hp deep well jet pump coming in a variety of types but also different price range. The following is the top 9 1/2 hp deep well jet pump by our suggestions
874 reviews analysed
1. WAYNE CWS50 1/2 HP Cast Iron Convertible Well Jet Pump for Wells up to 90 ft.
- Assembled in the US with foreign and domestic parts.
- 1/2 hp
- max. Flow rate is 408 gallons per hour
- (50 psi)
- 3/4 in. Npt discharge with 1-1/4 in. Npt suction and 1 in. Drive
- Pressure switch is pre-set at 30-50 psi for automatic operation
- Jet assembly required (sold separately).
- Pumps up to 310-Gallon per hour
- Dual voltage (120-240-Volt) high efficiency square flanged motor is factory wired for 120-Volt.
- Dedicated priming port for volute filling
- Durable cast iron volute
- 3/4-Inch NPT discharge with 1-1/4-Inch discharge and 1-Inch drive
The Wayne CWS50 1/2-horsepower shallow well jet pump is for wells up to 90-feet deep. At 50 psi it pumps up to 310-gallon per hour at 5-feet depth.
From the Manufacturer
The Wayne CWS50 1/2-Horsepower shallow well jet pump is for wells up to 90-Feet deep. At 50 PSI it pumps up to 310-Gallon per hour at 5-Feet depth.
2. ECO-FLO Products EFCWJ5 Deep Water Well Jet Pump, 1/2 HP, 4.5 GPM
- Provides superior performance and high capacities with more pressure for deep water wells at 20 feet
- Built-in overload motor, well injector kit included (well injector casting, jet nozzle, venturi tubes,and hardware)
- Dual Voltage- 115/230V (factory set at 230V)
- 1-14” suction, 1” discharge
- Motor features stainless steel shaft, heavy-duty bearings, balanced rotor, mechanical seal and insulated windings
- Download the User Manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information
Provides superior performance and high capacities with more pressure for deep water wells at 20 feet. Please see spec sheet for gph at various water depths. ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The eco-flo committment is to produce pumps for the long term at the best value. Eco-flo history: the ECO-FLO Products brand started in 2008 focused on supplying the retail channel and its customers with high quality, affordable utility, sump, sewage and water systems pumps. While the brand is relatively new, our products have a long and recognized history of over 25 years as an oem supplier. Today, we operate out of our 130,000 square foot facility in Ashland, OH. We have a growing dedicated staff with over 120 years of pump experience. We are an aggressive retail pump manufacturer emphasizing high quality products. Click on the ECO-FLO Products link at the top of this page to see more ECO-FLO Products.
3. Acquaer 1/2 HP Dual-Voltage Durable Cast iron Convertible Deep WellJet Pump With Injector kit
Acquaer CJE050-1 is a 1/2 HP convertible Jet Pump can be used as shallow well jet pump where depth of the well is 25 ft. and deep well jet pump where depth of well is 26-80 ft.. The pump can run at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery
4. Goulds J5 Convertible Jet, Deep Well Pump – 115v/230v – 1/2 hp
- Convertible: May be used on shallow or deep well applications using appropriate Goulds Water Technology fittings. Serviceable Back pullout design for service without disturbing piping. Two compartment motor for access to wiring and replaceable components. UL778 listed Maximum temperature: 140°F
- Nozzle clean out plug in Shallow well adapter. Corrosion resistant, plastic tubing and fittings are easily removed for cleaning. Premium O-RING design fittings need only be hand tight to seal. Impeller: F. D. A. Compliant, glass filled Noryl. Corrosion and abrasion resistant.
- Diffuser (Guide vane): Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.
- Corrosion resistant: electro-coat paint is baked on. Protected mechanical seal: diaphragm retains water in the casing to ensure the mechanical seal can never run dry. Excellent air handling ability: after initial priming the pump has the ability to re-prime itself. Pumps are manufacturer tested and may contain water inside from such testing applications specifically designed for: homes farms cottages
- Booster service specifications pump: pipe connections: 1¼” NPT suction, 1″ Npt discharge, 1″ Npt drive (pressure) Pressure switch: as4 preset at 30-50 PSI motor: NEMA standard 60 Hz 1/2 HP, 115/230 V capacitor start single phase 3500 RPM built-in overload with automatic reset stainless steel shaft rotation: Clockwise when viewed from motor end
Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coat paint is baked on. Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself. APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼” NPT suction, 1″ NPT discharge, 1″ NPT drive (pressure) Pressure switch: AS4 preset at 30-50 PSI Motor: NEMA standard 60 Hz 1/2 HP, 115/230 V capacitor start Single phase 3500 RPM Built-in overload with automatic reset Stainless steel shaft Rotation: clockwise when viewed from motor end UL778 listed Maximum temperature: 140°F Pressure regulator included. Pumps are manufacturer tested and may contain water inside from such testing
5. Acquaer 1 Hp 11.5GPH Cast Iron Convertible Jet Pump
Acquaer CJE100 is a 1 HP convertible Jet Pump can be used as shallow well jet pump where depth of the well is 25 ft. and deep well jet pump where depth of well is 26-80 ft.. The pump can run at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery
6. 1/2 HP Shallow Well Jet Pump by Lanchez Stainless Steel Water Pump Transfer Removal Irrigation Pumps for Clean Water 960GPH
- 1/2 HP
- Flow rate to 960 gallons per hour
- Corrosion-resistant stainless steel construction extends product life and is easy to clean.
- Lower noise and emergy-efficient motor with thermal overload protection.
- Designed for continuous duty use in watering application. Suitable use in garden, lawn, farm and rural house.
- UL certificated. TIP: Please add some water to the outlet before operation.
7. Goulds J7 Convertible Jet/Deep Well Pump – 115V/230V – 3/4 Hp
- Back Pullout design for service without disturbing piping
- Two compartment motor for access to wiring and replaceable components
- Nozzle clean out plug in Shallow well adapter, premium O-RING design fittings need only be hand tight to seal
- Corrosion resistant, plastic tubing and fittings are easily removed for cleaning
The J7 is specifically designed for homes farms cottages and booster services. Its Convertible design may be used on shallow or deep well applications using appropriate fittings.This pump features a back pull-out design two compartment motor for easy access to wiring nozzle clean out plug in shallow well adapter and is corrosion resistant. Volts: 115/230, amps: 14.8/7.4
8. RainBro 1/2 HP Cast Iron Shallow well jet pump for wells up to 25 ft, shallow well water pump, Model# CSW050
- GREAT PERFORMANCE – 1/2 hp, max. Flow rate is 390 US [email protected], 1-1/4 in. suction and 1 in. discharge.
- AUTOMATIC OPERATION – Pressure switch is pre-set at 30-50 psi for automatic operation.
- DUAL VOLTAGE – 115V/230V motor, factory set for 230V with the quick change voltage selection switch inside motor cover box.
- DURABLE – Rugged cast iron pump body for durability and dedicated priming port for volute filling.
- WORRY FREE – 2 year manufacturer’s warranty.
High Capacity Pumping
The RainBro CSW050 1/2 horsepower cast iron shallow well water pump is designed for wells up to 25 ft. deep. At 40 psi it pumps up to 390 US [email protected] 5 ft.. This heavy-duty well pump is designed with a 115/230-volt motor, factory set for 230V with the quick change voltage selection switch, and the pressure switch is set to 30 psi on for high-pressure delivery, produces up to 50 psi with automatic shut-off.
Jet Pumps are mounted above ground and lift the water out of the ground through a suction pipe. RainBro well pumps are used for supplying fresh water to large homes, farms, and cabins.
2 year limited warranty
What’s in the Box
1/2HP shallow well jet pump
Do not run the pump before priming it, Remove the priming port and pour clean water into the unit until casing and suction line are completely filled.
This jet Pumps are NOT submersible and are usually placed inside a protected area outside a well.
9. SCHRAIBERPUMP 4" DEEP WELL SUBMERSIBLE PUMP 1HP 230v 310FT 21GPM 134PSI (max) w/control 2 Years WARRANTY – STAINLESS STEEL DISCHARGE, CASING AND FLANGES, INCLUDES WIRE SPLICE KIT – model 42092M
SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!
This is our Stainless Steel Deep Well Pump which is ideal for the Supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come.
-The pump has a thermally protected motor with a 95°F maximum work temperature to keep from overheating while in use.
-The 3-wire + ground wire design provides a control box for easy provision and energy efficiency.
-The outlet is also made from stainless steel and not iron or brass like lesser quality pumps.
-The well pump submersible is easy to install and extremely versatile.
-Heavy duty stainless steel body fit for home usage and industrial.
-This pump model can not work dry, that will cause serious and irreversible damage to the motor. Make sure that the pump is install at a depth where it will be fully submerged at all times.
-This pump model features a built in check valve, however this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won’t fulfill that function.
-2 years warranty.
NOTICE: Our pumps are checked for physical damage before they’re shipped. As soon as you receive it check for any damage that might have occurred during shipping, and please report it to Amazon if you see any.
NOTICE 2: This pump is designed to be used in clear pure water only, even an small amount of sand diluted in the water will damage it, make sure your well pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.
By our suggestions above, we hope that you can found 12 Hp Deep Well Jet Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!