Top 10 79 Johnson Sail Master 99 Hp Water Pump
Finding your suitable readers for 79 johnson sail master 9.9 hp water pump is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 79 johnson sail master 9.9 hp water pump including detail information and customer reviews. Let’s find out which is your favorite one.
620 reviews analysed
1. Liberty Pumps 331 Portable Transfer Pump, one-size, RED
331 Features: -Pump.-Perfect for boosting water pressure, draining hot water tanks and general water transfer.-Not intended for permanent installations.-0.75” Brass garden hose connectors.-Glass reinforced thermoplastic impeller.-Large prime plug with internal funnel design easy priming.-Easily replaced motor brushes.-Maximum suction lift of 180”.-Thermally protected.-Engine HP: 1/2.-RPM: 7500.-Power cord: 240”.-Maximum fluid temperature: 135 F. Color/Finish: -Durable epoxy powder coat finish. Specifications: -Include: One-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, convenient on / off switch, powerful 0.5 hp motor capable of pumping to over 1200” of head.-115 Volts / 60 Hz / 8 Amps motor. Dimensions: -Dimensions: 7” H x 4.5” W x 9.75” D. Warranty: -2-Year warranty.
From the Manufacturer
This portable pump is perfect for boosting water pressure, draining hot water tanks and general water transfer. Features include a one-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, a convenient On/Off switch, and a powerful 1/2hp motor capable of pumping to over 100-Feet of head. Not intended for permanent installations. This pump delivers up to 40-Pound of pressure, has a maximum discharge head of 105-Feet , and a maximum vertical suction lift of 15-Feet.
2. Saniflo 010 SANISHOWER Light Duty Gray Water Pump, White
010 Features: -The Sanishower is a small white water pump that may be used to pump waste water away from a shower, sink, bar sink or other fixture. -The Sanishower is small enough to fit inside a wet bar cabinet or even beside or underneath a raised shower base. -CSA certification. -Normal running time WC: 10 – 15 seconds. -Polypropylene, C.R.P., stainless steel and neoprene construction. -White finish. Finish: -White. Material: -Plastic. Generic Specifications: -Motor RPM: 3600. -Amperage: 3.5. Dimensions: -Horizontal Discharge: 100 feet. -Vertical Discharge: 12 feet. -Discharge Pipe Diameter: 0.75”. -Gravity Fall on Horizontal Installations: 0.25” per feet. Overall Height – Top to Bottom: -5.75″. Overall Width – Side to Side: -11.5″. Overall Depth – Front to Back: -6.5″. Overall Product Weight: -15 lbs.
From the Manufacturer
The SANISHOWER allows you to install a shower where you never thought possible. It gives you a fast and easy way to add an additional sink or shower to your home. It is a small gray water pump that may be used to pump waste away from a shower or sink. The SANISHOWER is small enough to fit inside a wet bar cabinet, or even beside or underneath a raised shower base. It has two inlets for installing a shower or sink and it will pump up to 12-Feet high and/or 100-Feet away from a soil stack. This pump can be installed in many locations such as a loft/attic, upper floor, ground floor, basement and even a converted garage. This product is ideal for installing a shower and/or sink in a bedroom or basement. As a point of interest, quite a few pedicure manufacturers are putting the SANISHOWER inside pedicure chairs. Due to its quiet operation and ease of installation, they have become the choice of OEM’s. The inside of the SANISHOWER is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the pump. When water enters the unit, it activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum. Water enters the chamber and is pumped away into the sanitary sewer. The discharge elbow on the side of the SANISHOWER can be rotated 360 Degree to fit any type of installation required. A non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit. This unit has been designed with a vent output on the side of the unit. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. It is also highly recommended for the gray water pump to be connected to a Ground Fault Interrupter circuit.
3. Saniflo 008 SANIVITE Gray Heavy Duty Water Pump, White
008 Features: -The Sanivite is a gray water pump and is ideally suitable for use in a basement apartment. -The Sanivite is the perfect quiet solution to install a laundry room on the ground level or in the basement. -It will pump waste water away from a variety of sources, such as a kitchen sink, laundry sink, washing machine (indirect via a laundry tub only), dishwasher, bar sink, etc. -In addition to sinks, Sanivite will also accept and discharge the waste water from a variety of other sanitary fixtures, such as: a sink, a bath, a urinal and possibly a small whirlpool. -The Sanivite is small enough to fit comfortably inside a kitchen cabinet or vanity or inside the overhang of a whirlpool. -CSA certification. Product Type: -Toilet tank. Finish: -White. Dimensions: Overall Height – Top to Bottom: -13.25″. Overall Width – Side to Side: -14.5″. Overall Depth – Front to Back: -7.25″. Overall Product Weight: -21 lbs.
From the Manufacturer
The SANIVITE is the perfect, quiet solution to install a kitchen or sink on the ground level or in the basement. It’s a gray water pump ideally suitable for use in a small foot print kitchen. It is small enough to fit comfortably inside a kitchen cabinet or vanity. It will pump waste water away from a variety of sources, such as a kitchen sink, laundry sink, or even a dishwasher or washing machine. The SANIVITE can be installed in many locations such as a loft/attic, upper floor, ground floor, basement and even a garage. Whether you’re remodeling a kitchen, installing a sink in the basement or building a covered outdoor kitchen, SANIVITE will get the job done. This model was designed to sustain the toughest applications meant for gray water pumps. Its pumping capabilities and unique design are the reason why these range of pumps are preferred for heavy duty applications. The inside of the SANIVITE is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the pump. The unit pumps the effluent upward 16-Feet and/or 150 horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down, the micro switch deactivates the unit until water enters the unit again. A normal operating cycle for the SANIVITE can be as short as 2-10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal. This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. The use of mechanical vents, air admittance valves, or similar devices is not permitted as these are considered one-way air vent systems. It is also highly recommended for the gray water pump to be connected to a Ground Fault Interrupter circuit.
4. GOULDS Pumps GT20 IRRI-Gator Self-Priming Single Phase Centrifugal Pump, 2 hp, Blue
5. WAYNE PC4 1/2 HP Cast Iron Multi-Purpose Pump With Suction Strainer
- The product is manufactured in China.Generates up to 50 PSI at outlet hose
- generates up to 15 ft. of suction lift at inlet hose
- The product is highly durable and easy to use
- Easy installation and easy handling
- 1/2 HP transfer water pump can be used to increase line pressure up by up to 40 PSI
- Use to pump out flooded basements, tanks, or boats
- Made from durable cast iron steel
- Connects to garden hose with 3/4-inch brass hose connections
- 1-year limited warranty
1/2 HP, Cast Iron, Portable Utility Pump, Pumps Up To 1450 GPH at 0′, Portable Cast Iron Transfer Utility Pump, High Performance 1/2 HP, Motor Boosts Line Pressure Up To 40 PSI, 3/4″ Brass Hose Adapters Connect To Standard Garden Hose, Portable Transfer Pump, You Can Take Anywhere & Plug In, Easy Prime Priming Outlet, Applications Include Drainage, Dewatering Flooded Basements, Emptying Stock Tanks, Draining Water Heaters, Charging Polyglycol Radiant Heating Lines, Easy Carry Cast Iron Handle For Portability, Reinforced Thermoplastic Suction Strainer Included. The product is manufactured in China. Easy installation and easy handling.
The Wayne 1/2 HP 115-volt transfer water pump can pump water out of flooded basements, tanks, or boats. It can also increase line pressure by up to 40 pounds or be used to water lawns and gardens, and can even be used to wash cars and sidewalks. It’s made from durable cast iron steel. The included suction strainer keeps out extraneous material, and the 3/4-inch brass hose connections resist stripping while easily connecting to garden hoses. A top-threaded priming port is easily filled, and the ball bearings have lifetime lubrication. Wayne backs its pump with a one-year limited warranty.
6. FLUENTPOWER 1 HP Portable Stainless Steel Lawn Sprinkling Pump with 1" NPT Female Thread for Garden Irrigation and Pressure booster
- 【Garden Sprinkler Pump】- With stainless housing and waterproof on/off switch, easy carry handle for portability and storage
- 【1HP High Power High Efficiency】- The pump has maximum flow rate of 845 gallons per hour, Maximum Lift head up to 144ft and Max suction depth 8m
- provides the necessary power to booster water pressure and connects to sprinklers
- 【Pure Copper Motor with Thermal Protection】- Pure copper motor can bring better and more lasting work to the pump, overheat protection ensures that the pump will not be burned out.
- 【Idea Use For】Pump is designed to work only with CLEAN WATER, Sutiable for ponds, pools, sprinkling systems, flow irrigation systems, gardening, rain barrels, large aquariums, use in agriculture settings, shallow and water wells. The pump is also compatible with a pressure regulator and work as a booster pump.
- 【12 Month Warranty】The pump has 1″ NPT female thread and is easy to set up with 1″ hose or adapter.
7. WAYNE PLS100 1 HP Portable Stainless Steel Lawn Sprinkling Pump
- 1 hp
- max. Flow rate is 720 gallons per hour
- 520 gph at 10 ft. Of discharge lift
- Portable stainless steel with safe and convenient on/off switch and easy carry handle for portability
- Fan cooled continuous-duty 115 volt motor draws water up to 20 ft.
- 1 in. Npt suction and discharge threads, 3/4 in. Garden hose adapter included
- 180 ft. Of total dynamic head, maintains pressure up to 80 psi,Durable corrosion resistant construction.
- Multi-purpose 1 HP pump
- Generates suction lift up to 20 feet
- Made from rugged stainless steel
- Pumps up to 720 gallons per hour
- 1-year limited warranty
Wayne PLS100 1 hp portable stainless steel water sprinkling pump. 1 hp; max. Flow rate is 720 gallons per hour; 520 gph at 10 ft. Of discharge lift. Portable stainless steel with safe and convenient on/off switch and easy carry handle for portability. Fan cooled continuous-duty 115 volt motor draws water up to 20 ft. 1 in. Npt suction and discharge threads, 3/4 in. Garden hose adapter included. 180 ft. Of total dynamic head, maintains pressure up to 80 psi. Durable corrosion resistant construction. Lift water as high as 25 ft. And discharge pressures from 35 to 50 psi.
The Wayne 1 HP 720 GPH portable lawn sprinkling pump is designed to draw water from ponds and rivers to sprinkle lawns or gardens, clear standing water, and empty or fill tanks. It’s made from durable stainless steel that holds up to wear and has threads that won’t strip. The pump generates suction lift of up to 20 feet, with a maximum discharge head of 180 feet and 720 gallon per hour maximum flow rating. The automatic thermal protection prevents overheating if small extension cords are used to power the pump, and a garden hose adapter makes start-up simple. You should use this pump with the highest amp-rated cord possible for optimum performance. Wayne backs its pump with a one-year limited warranty.
8. Johnson Pump 65434 Aqua Jet Wash Down 5.2 GPM Pump Kit – 12V
- Makes it easy to add a wash down pump to any boat
- Includes: High capacity Aqua Jet WD 5. 2 GPM, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, 25′ coiled wash down hose and an illuminated panel switch
- Five-chamber construction
- Self-priming pump
- Integrated pressure switch
- Fit type: Universal Fit
19 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, 7.5 meters (25′) of coiled wash down hose and an illuminated panel switch all in one package. Aqua Jet wash down pump kit makes it easy to add a wash down pump to any boat.Whisper quiet operation,Smooth flowing,Easy, low cost maintenance,Quick-connect hose,Integrated pressure switch,Long service life.
9. 1 HP Shallow Well Pump by Lanchez Portable Stainless Steel Water Transfer Lawn Sprinkler Irrigation Pump 1294GPH 147ft Height
- 1 HP
- Flow rate to 1294 gallons per hour
- Easy-to-carry handle for portability
- Lower noise and emergy-efficient motor with thermal overload protection
- Offers superior performance to 26 feet depth of water at 65 PSI. Heavy-duty, corrison-resistant stainless steel head extends product life and is easy to clean.
- More powerful than those 1.6HP pump on the market. Suitable use in garden, lawn, farm and rural house.
- UL certificated. TIP: Please add some water to the outlet before operation.
10. UANOFCN Impeller Water Pump Repair Kit for Johnson Evinrude 394711 0394711 18-3327 9.9-15 HP Outboard Water Pump Kit with Housing
- Order promises to process shipment within 24 hours
- Fits : 9.9/15 HP (1974-Up), 9.9/15 HP 4-Stroke (1994-Up)
- Replace 9.9 outboard motor 4 stroke 2 stroke Johnson Evinrude OMC 394711 0394711 18-3327 Mallory 9-48201 GLM 12050 Mallory 4-3327-EMP PRO 3327 WSM 750-290
- Can be replaced with the following：391698 386697 387610 46-02855 389112 ,318875, 318999, 319989, 386685, 386886, , 388139, 389114, 391388, 391689, 393560, 394771, 777801
- Package Contents: 4 X Installation Bolt 3 X Grommet 2 X O-Ring 1 X Pump Housing 1 X Pump Cup 1 X Neoprene Impeller 1 X Pin 1 X Seal 1 X Wear Plate
By our suggestions above, we hope that you can found 79 Johnson Sail Master 99 Hp Water Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!