
764 reviews analysed
1. Cen-Tec Systems 94093 35 Ft. Low Voltage Central Vacuum Installed Hose Sock, Light Gray
Feature
- 1.375” x 35 foot pearl gray central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
- Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
- The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue
- Compatible with all major brands of central vacuum including eureka, beam, electrolux, vacumaid, canavac, hoover, cyclovac, husky, vacuflo inlets with pin jack inlets, m + s, md, imperium, and most regional brands
- The eva body and pearl gray color will not mark walls, floors, or furnishings and the 35 foot length is longer than the industry standard 30 feet to make it easy to reach to the corners of the room even when furnishing are present
- The wall end design fits industry standard wall inlets equipped with low voltage contacts inside the valve opening. The split contacts in the wall end provide a simple circuit through to the handle switch for turning your central vacuum power unit on and off at the working end of the hose
- Low voltage hose, so it is not compatible with electric power nozzles
- The locking stub tube is ideal for insuring the wand stays in place, avoiding unintended separation
- Features an installed soft cotton lycra blend hose sock which smooths the surface of the hose to prevent damage to base boards, door jambs, and fine furnishings in the home. The sock is treated with an anti-microbial to protect your home environment
- Hose is made in the USA
2. Broan-NuTone CH235 Crush-Proof Central Vacuum Hose with Swivel Handle, 30-Feet
Feature
- HIGH-QUALITY HOSE: Crush-proof, low-voltage vacuum hose springs back to its original shape after use for easy storage
- DURABLE: Vinyl reinforced construction with a dark gray finish provides long lasting use
- EASY TO USE: Features an on/off switch to simplify controls – making it easy for everyone to use!
- UNIVERSAL: Includes patent-pending universal hose end which fits all Broan-NuTone vacuums and most other standard inlets for your convenience
- IDEAL SIZE: Vacuum hose measures 30-feet in length and has a 1.38″ inner hose diameter to make cleaning easy!
Description
Enhance your vacuum with Broan-NuTone’s Crush-Proof Central Vacuum Hose! This low-voltage hose springs back to its original shape after every use. The durable vinyl reinforced construction has a dark gray finish to ensure long-lasting use. The crush-proof vacuum hose features an on/off switch for easy use. It includes a patent-pending universal hose end which fits all Broan-NuTone central vacuums and most other standard inlets. This hose is 30-feet in length and has a 1.38″ inner hose diameter. Keep your house spotless with Broan-NuTone’s Crush-Proof Central Vacuum Hose!
3. Cen-Tec Systems 91353 Central Vacuum Hose, 40 Ft, Light Gray
Feature
- 1.375” x 40 foot pearl gray central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
- Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
- The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue. The hose is highly flexible and has a soft surface with rounded corrugations to avoid damage to household furnishings without the need for a hose sock
- Compatible with all major brands of central vacuum including eureka, beam, electrolux, vacuumed, canavac, hoover, cyclovac, husky, vacuflo inlets with pin jack inlets, m+s, md, imperium, honeywell, and most regional brands
- The eva body and pearl gray color will not mark walls, floors, or furnishings and the 40 foot length is longer than the industry standard 30 feet to make it easy to reach to the corners of the room even when furnishing are present
- The wall end design fits industry standard wall inlets equipped with low voltage contacts inside the valve opening. The split contacts in the wall end provide simple circuit through to the handle switch for turning your central vacuum power unit on and off at the working end of the hose
- Total control hose provides on and off control of the vacuum at the handle
- The 91353 is a low voltage hose, so it is not compatible with electric power nozzles
4. Cen-Tec Systems 93367 Central Vacuum Attachment Kit Gray
Feature
- Features a commercial grade 1.25X 35 foot vacuum hose with the trademarked arc relax strain relief to increase hose life by preventing kinking
- Includes a premium Gray rug and hard floor combination tool with wheels to insure easy movement on carpeted surfaces and area rugs
- Includes a white hose hanger with a unique non-slip blade to keep the hose on the hanger
- Compatible with all major central vacuum brands including, beam, electrolux, eureka, vacuflo, vacumaid, md, aerus, cyclovac, canavac, honeywell, vacuflo, and imperium
- The hose features a smooth interior for superior airflow and the soft Gray color assure the hose to be non-marking
Description
The 93367 is designed to complement all major central vacuum systems and is an ideal set of accessories for those concerned about black tools marking surfaces. The 1.25 inch inner diameter commercial grade vacuum hose is highly flexible with a smooth interior for superior airflow. Cen-Tec’s trademarked arc relax strain relief system covers the last 14 inches of each end of the hose and prevents kinking increasing hose life. The premium combination nozzle has a wheel system, metal base plate, and pivoting swivel neck that keeps the tool parallel to the surface of the floor for superior vacuuming. A five-piece accessory set with natural fill dusting and natural fill upholstery tool is ideal for all above the floor surfaces. The 93367 is lightweight, making it ideal for cleaning above the floor surfaces, stair risers, while reducing fatigue. The 93367 is designed to be compatible with all major central vacuum brands including: Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Honeywell, Galaxie, Imperium, and Nutone installed with valves that have approximately a 1.50 inch industry standard opening.
5. Electrolux Central Vacuum Premium Bare Floor Brush
Feature
- *Fits ONLY Electrolux Quiet Clean, ELUX1600 and Beam Q powerhead that have square neck
- This floor brush comes with a square neck and is NOT compatible with the standard round neck hose and accessories
- *Sumo Floor Brush NOT compatible with Epic Series
- *Perfect for any hard surface you want to clean. Wand is not included but offered separately
- *Free Technical Support, contact 929.800.2980
6. Cen-Tec Systems 93730 Central Vacuum Garage Attachment Kit with 30 ft. Hose, Black
Feature
- Includes a 30 foot crush proof commercial grade vacuum hose featuring the Cen-Tec exclusive arc relax strain relief that helps preserve hose life by reducing kinking and sharp bends at the wall valve and working end of the hose
- Features a four piece premium accessory set including a 30 degree soft grip handle, 13” wide mouth paddle crevice, paint brush soft dusting tool, and an upholstery tool that is ideal for lifting matted carpet and releasing stuck on dirt from floor mats, trucks, and upholstery. An extra natural fill dusting tool is included for gentle cleaning of cloth upholstery
- The upholstery tool is designed to mimic the commercial car wash tool with a wide throat to pick up large and non-uniform debris
- Designed to fit close to the 360 degree swivel end on the hose to make cleaning easier to control the tools when working in confined space. The swivel feature allows the tools to be positioned for maximum effectiveness
- Includes two plastic extension wands and a 12” natural fill floor brush allowing you to not only clean the car but also tidy up around the garage
- Contains a handy hose hanger and caddy bag for holding all the tools when not in use. We recommend hanging the hose at close to eye level which reduces the need to tightly coil the hose
- Compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&S, Honeywell, MD, Galaxie, Imperium, and Cyclovac
- The 30 foot, 1.25″ diameter crush proof commercial grade hose will last for years, even in harsh high use environments
Description
The 93730 is designed to use your central vacuum system in the garage or work shop for fast effective clean-up. The Cen-Tec exclusive tool set was designed with the unique cleaning requirements associated with detailing cars, boats, and RV’s. The tool set is set at a unique 30 degree angle not the typical 45 degree to relax your wrist and reduce the effort that comes from trying to position the tool at the proper angle for effective cleaning. The nylon fill dusting tool is paint brush soft with extra long fill to reach into the louvers on your car dash, the deep corner when the dash meets the windshield and down into the deep pockets on the door panels. A second dusting tool is ideal for grooming upholstery and open, hard surfaces. The upholstery tool feature can be angled down for gentle cleaning or angled up to engage aggressive teeth for raising matted carpet or releasing stuck on dirt that dries and grabs the carpet surface. The two extension wands a 12” natural fill floor brush extends the use of the 93730 to floors and walls great for capturing cobwebs or saw dust. The 30 foot crush proof commercial grade hose will last for years, even in harsh high use environments. The 93730 is compatible with all major brands of central vacuums including Beam, Electrolux, Eureka, Canavac, Vacuflo, Vacumaid, Nutone, M&S, Honeywell, MD, Galaxie, Imperium, and Cyclovac.
7. Central Vacuum Padded Hose Cover – 30 ft length
Description
The VacSoc is designed to prevent dents, chips and scuff marks caused by the central vacuum hose rubbing against the interior contents of the home. Padded Zippered – multi-pattern prints in Grey
8. Cen-Tec Systems 91431 Complete Central Vacuum Accessory Kit with Metal Wands
Feature
- Designed to provide a basic set of accessory tools for a central vacuum. The 91431 features a 1.25” x 30 foot non-electric hose produced using a unique process that provides a very smooth interior for superior airflow and quieter use
- The 13” metal friction curved end is designed to swivel over the hose meaning less stress on you and the hose. Friction indicates that all tool to tool connections are made by the two parts wedging, pressing together without a physical locking mechanism
- The wall end is an industry standard 1.50” on the outer diameter making it compatible with all major central vacuum inlets which have a 1.50” inlet with the exception of a nutone branded inlet which has a slightly smaller opening
- The package features two chrome wands with nylon friction collars to help them stay in place without them wedging together so they can never be separated. A 12” natural fill floor brush and a combination nozzle which is ideal for area rugs door mats. A basic accessory set including a 10” crevice, 4” dusting tool, and 5” upholstery. The mesh caddy bag allows you to collect and store the tools on the hose hanger with the hose in a bag that gives you visibility
- The 91431 is compatible with all major brands of central vacuum including beam, eureka, vacuflo, vacu-maid, imperium, cyclovac, star power, canavac, Hayden, air vac, md, and nutone systems not using the nutone branded square inlet
- Industry standard wall valves and utility inlets on central vacuums that include this feature have the same inner diameter and will accept this hose end. The metal band will activate the low voltage control of your vacuum turning it on as it is inserted
Description
The 91431 is designed to be a general use straight air accessory set for the home, shop, or garage. Often it is used as a second tool set Complimenting the power nozzle or Turbine package that came with the central vacuum. Having a second tool set can save you time and effort moving a tool set from floor to floor in multi-story homes. The hose end is designed for what has historically been industry standard inlets and will activate a system with low voltage contacts in the wall valve. There were a few valves typically produced before 1980 which may use a micro-switch for activation of the vacuum. In most cases the 91431 will still work but the automatic activation of the system will not be delivered by the banded cuff. The set includes a full range attachments for most standard household cleaning jobs. This set is deal for a basement, garage, or general use in the home, especially on hard floor areas. The floor brush is ideal for cleaning hardwood, tile, stone, and vinyl.
9. Cen-Tec Systems 90177 Central Vacuum 35 Feet Direct Connect Electric Hose with Hose Sock and Locking Stub Tube
Feature
- Direct Connect Hose End
- 35 Feet of hose length, helping you be able to reach in every hard-to-get-to corner of the room
- Compatible with major brands of central vacuum, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- Includes a soft-grip handle with a great ergonomic feel
- Includes an installed knit hose sock to protect furnishings
Description
The #90177 electric hose is an individually packed 35 Ft. electric hose with direct connect wall end and chrome locking stub tube. The hose features a soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. Also includes an installed knit hose sock to protect furnishings.
Conclusion
By our suggestions above, we hope that you can found Beam Electrolux Central Vacuum Hose for you.Please don’t forget to share your experience by comment in this post. Thank you!