The Best Ez Dishwasher

Throughout the years there have been many problems with getting dishwashers anchored correctly. Problems also occurred if the dishwasher was not on site at the right time. This led to the design of the E-Z Dishwasher Bracket. The bracket eliminates many of the problems associated with anchoring dishwashers and is great for installation either before or after counter top installation. The feedback from other builders and counter top installers has been very positive. The bracket is easy to install and eliminates callbacks for dishwasher anchoring, which saves time and money.

Introducing E-Z DISHWASHER BRACKET Made in USA from 22 gauge galvanized steel Eliminates dishwasher anchoring problems Accommodates virtually any dishwasher Easy installation under any type of counter top Can be installed prior to or after counter top installation Dishwasher does not have to be present at jobsite Won’t damage expensive cabinetry like kits that anchor to sides alone Eliminates return trip by counter top installer to anchor dishwasher Saves time AND money! About E-Z DISHWASHER BRACKET Construction Ventures is a family owned corporation based in Williamson County, Tennessee. Michael Peay and Sam Moss, the company principals and contractors, have 50+ years of combined experience in the development/building industry. They are very hands-on and are always available for trouble shooting on their jobs. They are constantly looking for new and more efficient ways of doing things. Throughout the years they have had many problems with getting dishwashers anchored correctly. Problems also occurred if the dishwasher was not on site at the right time. This led Michael to design the E-Z Dishwasher Bracket. The bracket eliminates many of the problems associated with anchoring dishwashers and is great for installation either before or after counter top installation. The feedback from other builders and counter top installers has been very positive. The bracket is easy to install and eliminates callbacks for dishwasher anchoring, which saves time and money.

The 24″ E-Z Bracket attaches to the cabinet with wood screws as well as to the counter top with impact absorbing adhesive caulk or silicone. It is made to accommodate virtually any dishwasher on the market and may be installed prior to or after counter top installation. There is no need for the dishwasher to be on site due to the multiple attachment locations. Counter top installers need only install the bracket across the top of the dishwasher bay, flush tabs to face of cabinet and install screws provided at each end.

Provides an easy and affordable way to modernize accessories and appliances in your home Smudge-Proof and fingerprint resistant. Transforms ordinary surfaces plus gives the of look like stainless steel. Dishwashers, Dishwasher Panels, Refrigerators and more. Ideal for appliances or any smooth surface. Provides an elegant and smooth stainless steel finish without the cost.Easy peel and stick process and is NOT your grandma’s contact paper. Today, stainless appliances come in a variety of stainless shades. EzFaux Stainless addresses YOUR needs for the look you desire. We offer Satin Finish, Brushed Nickel and Graphite Brushed Stainless films to allow you to compliment your personal taste and appliances. All of EzFaux Decor Stainless Steel Peel and Stick Films are made using a vacuum metallization process to achieve the real look of stainless without the costs. The films are made in an ISO Certified facility using vacuum metallization process, 5 layers PET/PVC, non-toxic water based adhesive and are BUBBLE resistant. This is not ConTact Paper. For use on refrigerators, dishwashers and other household items such as tabletops, picture frames, accessories and more. We make films to compliment: Samsung, LG, KitchenAid, Maytag, GE, Kenmore, Sears, Bosch, Frigidaire and more. As seen on The Steve Harvey Show, The Rachael Ray Show, HGTV, QVC, The Today Show, DIY Network and more. EzFaux Decor’s � Bubble Resistant Faux Film has been tested using Standards 3006,6734,2274,3501 and 3073. Please contact us if you would like a copy of all formal testing. Tear Resistant up to 330 pounds per yard. Stain Resistant for items such as grape juice, ink and wine. Wear Resistant, Fade Resistant Weather Stable for over 800 hours. Dimensionally Stable when exposed to hot and cold. Heat Resistant up to 240F 5 Year Warranty. Message us with your mailing address for samples.

Product Description

EZ FLO braided Stainless Steel Dishwasher Installation Kit comes with all the connectors and fittings required to set up your new dishwasher including a power cord. Its quality is determined by what you can’t see. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent punctures, kinking and crimping. This flexible dishwasher connector supply line resists corrosion and is easy to install. It is compatible with all the industry standard Dishwasher brands.

This Dishwasher installation kit is perfect for non-professionals which saves time & effort. This kit comes with
72″ Stainless-steel braided dishwasher connector;
6′ Straight pigtail cord, UL listed;
(3) Yellow plastic wire nuts, #74B, 18-22 gauge;
(1) Stainless-steel hose clamp, #16 -for drain line;
(1) Romex connector

All these supplies make it easy to install.

How to install Dishwasher:
1. Disconnect or unplug all the electric and water line.
2. Slide the new dishwasher grasping it by the sides to avoid denting the front panel.
3. Don’t secure it to the countertop yet. Wait until you make all connections and adjustments.
4. Connect the water line, so it doesn’t leak.
5. With the supply line, the electrical cable and drain connected, turn the power and water back on and check for leaks.
6. Recheck the positioning, then screw the dishwasher to the countertop.

From the Manufacturer

Eastman’s 6′ Stainless Steel Dishwasher Installation Kit comes with all the connectors and fittings required to set up your new dishwasher including a power cord. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Comparable to OEM Parts include WP8269145, 8269145, EA393134, AP3039168, PS393134, 830941, AH393134 and many more.

FIXES THE FOLLOWING SYMPTOMS:
Door latch failure.
Door won’t close.

INSTRUCTIONS:
1. Turn off the power and water supply to avoid shock.
2. Open the dishwasher door and use a phillips screw driver to remove the screws that hold the dishwasher to the cabinet.
3. Close the dishwasher door and use it to pull the dishwasher out from the counter top. You only need to pull out far enough to expose the brackets.
4. The undercounter brackets are held in by the bent tabs on the bracket that hold the bracket in place. Straighten out the tabs and slide the bracket out.
5. Slide the dishwasher brackets into the same area you removed the original brackets and bend the tabs to secure the brackets to the dishwasher.
6. Finish by carefully sliding your dishwasher back under the cabinet. Use your provided screws to screw the dishwasher bracket directly to the underside of your counter with a Phillips screwdriver.

WHAT YOU GET:
2 x Dishwasher Mounting Brackets
2 x Mounting Screws

100% CUSTOMER SATISFACTION :
Feel free to contact us if you have any questions or problems with the item

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Provides an easy and affordable way to modernize accessories and appliances in your home Smudge-Proof and fingerprint resistant. Transforms ordinary surfaces plus gives the of look like stainless steel. Dishwashers, Dishwasher Panels, Refrigerators and more. Ideal for appliances or any smooth surface. Provides an elegant and smooth stainless steel finish without the cost.Easy peel and stick process and is NOT your grandma’s contact paper. Today, stainless appliances come in a variety of stainless shades. EzFaux Stainless addresses YOUR needs for the look you desire. We offer Satin Finish, Brushed Nickel films to allow you to compliment your personal taste and appliances. All of EzFaux Decor Stainless Steel Peel and Stick Films are made using a vacuum metallization process to achieve the real look of stainless without the costs. The films are made in an ISO Certified facility using vacuum metallization process, 5 layers PET/PVC, non-toxic water based adhesive and are BUBBLE resistant. This is not ConTact Paper. For use on refrigerators, dishwashers and other household items such as tabletops, picture frames, accessories and more. We make films to compliment: Samsung, LG, KitchenAid, Maytag, GE, Kenmore, Sears, Bosch, Frigidaire and more. As seen on The Steve Harvey Show, The Rachael Ray Show, HGTV, QVC, The Today Show, DIY Network and more. EzFaux Decor’s � Bubble Resistant Faux Film has been tested using Standards 3006,6734,2274,3501 and 3073. Please contact us if you would like a copy of all formal testing. Tear Resistant up to 330 pounds per yard. Stain Resistant for items such as grape juice, ink and wine. Wear Resistant, Fade Resistant Weather Stable for over 800 hours. Dimensionally Stable when exposed to hot and cold. Heat Resistant up to 240F 5 Year Warranty