We spent many hours on research to finding grundfos 1/2 hp submersible well pump, reading product features, product specifications for this guide. For those of you who wish to the best grundfos 1/2 hp submersible well pump, you should not miss this article. grundfos 1/2 hp submersible well pump coming in a variety of types but also different price range. The following is the top 10 grundfos 1/2 hp submersible well pump by our suggestions
952 reviews analysed
1. Grundfos 10SQ07-200 96160141 3/4 HP Submersible Well Pump
Grundfos 10SQ07-200 96160141 3/4 HP Submersible Well Pump offers a wide performance range, making it easy to find a model that will suit your individual requirements. The SQ is a compact multistage centrifugal pump that can be installed in a borehole no larger than the pump itself. With their built-in electronics, SQ pumps are very easy to install and operate. They guarantee a reliable water supply at all times. Equipped with permanent magnet motors, these flexible and compact pumps offer excellent efficiency levels and will supply pump heads up to 200 m.
2. Grundfos 10SQ05-160 96160140 1/2 HP 240V SQ Pump Unit
Grundfos 10SQ05-160. SMARTFLO SQ PUMP UNIT 1/2HP 1PHASE 200-240V
3. Grundfos 10SQ05-160 115v 3" Submersible Water Well Pump
Unique features makes the SQ series very easy to install and operate, and ensures reliable water supply at all times. SQ can be installed without the need of any additional control units. The SQ single high speed pumps, are ideally suited for a variety of applications: Domestic Water Supply Small water works Irrigation Featuring: Soft start To prevent water hammering and electrical disturbances High starting torque Even at low supply voltage, the SQ delivers a reliable water supply Over load protection Protects the motor against unstable voltage supply by reducing speed or stopping the pump Dry running protection Stops and prevents the pump from damage in case of dry running Automatic re-start Ensures a reliable water supply when ever possible
4. Red Lion 14942405 Submersible Deep Well Pump with Control Box, 1/2-HP 12-GPM 3-Wire 230-Volt, Stainless Steel
- SUBMERSIBLE DEEP WELL PUMP: 4″ submersible deep well pump is ideal for use in 4″ i.d. or larger wells from depths of 100 feet and it is powered by 3-wire, franklin electric motor.
- DEEP WELL PUMP: Hex rubber bearing with extra large surface assures shaft stability and multiple flow channels keep small particles such as sand away from bearing surfaces.
- ½ HP WELL PUMP: Built-in check valve prevents backflow and ensures system pressure. built-in suction screen and 1-1/4″ npt thermoplastic discharge head helps to prevent debris from clogging impellers and provides full.
- WATER PUMP: Built-In Suction Screen helps to prevent debris from clogging impellers and it is powered by Industry Standard Motor and it is proven as superior quality & performance ensuring quiet operation.
- VERSATILITY: 1-1/4″ NPT Thermoplastic Discharge Head provides full-flow performance without the risk of corrosion. It is extremely versatile.
Ideal for the Supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells to depths of 250′.
From the Manufacturer
This submersible deep well pump is ideal for 4-Inch I.D. or larger wells. It features a built in check valve, 12-GPM and built in suction screen.
5. Grundfos 59896155 UP15-42 F 115V Brute 9H Recirculator Pump
- Cast iron Flow range – 0- 15.5 U.S. GPM, Head range -1- 15-Feet
- Ceramic shaft and radial bearings with Carbon axial bearing and Stainless steel rotor can and bearing plate
- Corrosion-resistant impeller, Composite, PES
- Type of connection: C.I. Flange / Pipe connection: 2 – Bolt Flange
- The motor is a 1-phase motor. No additional motor protection is required
Grundfos UP15-42F Circulator Pump (59896155) is a 1/25HP cast iron circulator pump designed for use in closed loop heating applications, such as radiant heating, baseboards, fan coils, etc. Features include a built-in motor protection for longer life and better performance. It is suitable for a wide range of applications, including radiant heating, hydronic heating, fan coil heating, solar and other system types. Grundfos circulation pump has a whisper-quiet operation for sound sensitive installations. Box includes (2) Gaskets (O-rings).
6. Grundfos 59896341 Super Brute Circulator UPS15-58FC
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pump is characterized by ceramic shaft and radial bearings, carbon axial bearing, stainless steel rotor can and bearing plate, corrosion-resistant impeller, composite, PES, and cast iron pump housing. The motor is a 1-phase motor. No additional motor protection is required.
From the Manufacturer
Grundfos UPS15-58FC circulator pump (Grundfos# 59896341) incorporates a cast iron housing, three speed motor (Low/Med/High) and a built-in, removable check valve. Grundfos UPS15-58FC is among the most popular and most versatile circulator pump models on the market. Pump’s performance parameters cover nearly all traditional heating applications – from radiant and baseboards, to fan coils and zoning and many others. 3 speeds allow to set up the circulator pump in a way, that matches the system’s requirements, while wet rotor design allows it to be virtually silent while operating.
7. Hallmark Industries MA0419X-12A Deep Well Submersible Pump, 2 hp, 230V, 60 Hz, 35 GPM, 400′ Head, Stainless Steel, 4"
4″ deep well submersible pump. 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing.
* Patented impeller & 12 stage design. 35GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.
* Unique floating impeller design, premium seal, and UL qualified motor provide long life for this pump.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* Built in check valve included. Installing external check valve(s) is required.
* Hermetically sealed motor with capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, for less energy and long pump life.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Unique design reduces its noise. User’s manual and installation tape kit included.
* 400 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* Warranty: 12 months manufacturer’s warranty
8. Hallmark Industries MA0343X-4 Deep Well Submersible Pump, 1/2 hp, 110V, 60 Hz, 25 GPM, 150′ Head, Stainless Steel, 4"
- Pump, Deep Well Submersible Pump, 1HP, 110V 60HZ, 33 Gpm, Stainless Steel, for 5″ or bigger well, long life
- 2 wire pump with built in control box- DOES NOT require external control box
- Industrial grade heavy duty, good for home usage
- Built in thermal protection
- American company
- Use 115V power to run the pump. 110V is a nominal voltage – covers from 100 V to 130V.
- This pump has a max head of 150feet, which is to pump into an open tank, not a pressure tank. Please read the Pump Selection Guide provided under the product details.
9. Grundfos 59896155 SuperBrute Recirculator Pump small RED
10. Red Lion 14942409 RL22G10-3W2V Submersible Deep Well Pump with Control Box, 26.75"H, Gray
By our suggestions above, we hope that you can found Grundfos 12 Hp Submersible Well Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!